Options object for setting properties of pulseAngle.
The curve, corner, label and arrow can all be
pulsed with a simple scale number, or customization using
the {@type OBJ_Pulse} object.
The thick property can be used to change the default scale pulse.
When a 1 is used, the angle will pulse from the vertex of the corner
in scale. When thick is greater than 1, then the curve will pulse in
thickness. Use a much smaller scale for curve when doing this.
NB: When pulsing the thickness of a curve, the end corners of the curve
may break through when the arrow heads are small or there is a large curve
overlap between curve and arrow head. Use OBJ_AngleArrows to
adjust curveOverlap and arrow head size, reduce the thickness scale, or
increase the arrow scale to compensate.
Options object for setting properties of
pulseAngle.The
curve,corner,labelandarrowcan all be pulsed with a simple scale number, or customization using the {@type OBJ_Pulse} object.The
thickproperty can be used to change the default scale pulse. When a1is used, the angle will pulse from the vertex of the corner in scale. Whenthickis greater than 1, then thecurvewill pulse in thickness. Use a much smaller scale for curve when doing this.NB: When pulsing the thickness of a curve, the end corners of the curve may break through when the arrow heads are small or there is a large curve overlap between curve and arrow head. Use OBJ_AngleArrows to adjust
curveOverlapand arrow head size, reduce the thickness scale, or increase the arrow scale to compensate.